Tuxbox Neutrino - gui-neutrino/master

    • @PauleFoul
      Die HD51 hat PIP wenn du boxmode 12 baust. Leider fehlt da noch Code bzw da muss noch was gefixt werden, sonst gibts segfaults.

      Wie gesagt, bei abgezogener Antenne gebootet 2x umgeschaltet... Da fehlt dann irgendetwas und dann wird was im Verlauf falsch berechnet.

      Quellcode

      1. 22:28:01.526 cnThread: stop eit update filter (not active)
      2. 22:28:01.526 [sectionsd] commandserviceStopped done
      3. [ca_ci] -> GetNumberCISlots
      4. [ca_ci] -> GetNumberSmartCardSlots
      5. CNeutrinoApp::showChannelList: bouquetList 0x5f4108 size 131 old_b 1
      6. CChannelList::paint() after paint head: 4 msec
      7. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      8. x = 122 y = -144
      9. dx = 138 dy = 138
      10. item: cc_scalable_channellogo_box [type: 5]
      11. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      12. x = 122 y = -144
      13. dx = 138 dy = 138
      14. item: cc_scalable_channellogo_box [type: 5]
      15. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      16. x = 0 y = -6
      17. dx = 0 dy = 0
      18. item: cc_scalable_channellogo_box [type: 5]
      19. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      20. x = -131 y = -144
      21. dx = 138 dy = 138
      22. item: cc_scalable_channellogo_box [type: 5]
      23. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      24. x = -131 y = -144
      25. dx = 138 dy = 138
      26. item: cc_scalable_channellogo_box [type: 5]
      27. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      28. x = -131 y = 63
      29. dx = 138 dy = -207
      30. item: cc_scalable_channellogo_box [type: 5]
      31. [neutrino] [CCDraw] ERROR! Position < 0 or > FB end [paintFbItems - 544]
      32. x = -131 y = 63
      33. dx = 138 dy = -207
      34. item: cc_scalable_channellogo_box [type: 5]
      35. [neutrino] [CPictureViewer] [DisplayImage - 632] Error: image [/share/tuxbox/neutrino/icons/logo/BR Fernsehen Nord HD.png] width -115 height -69
      36. CChannelList::paint() after paint body: 30 msec
      Alles anzeigen
    • Neu

      Ausschalten in Standby beim Streamen gibt einen Neutrino segfault.

      Quellcode

      1. CMoviePlayerGui::PlayFileLoop: spd 1 pos 220360/5937000 (5716640, 3%)
      2. ShowText '00:03:40'
      3. CMoviePlayerGui::PlayFileLoop: spd 1 pos 220960/5937000 (5716040, 3%)
      4. CMoviePlayerGui::PlayFile: neutrino handleMsg messages_return::cancel_all
      5. CMoviePlayerGui::PlayFile: exit, isMovieBrowser 1 p_movie_info 0xdb8fc8
      6. CMoviePlayerGui::handleMovieBrowser: stop, isMovieBrowser 1 p_movie_info 0xdb8fc8
      7. [mi] saveMovieInfo: /media/neo_movies/ZDF_HD_Das_Traumschiff_20180401_201402.xml
      8. PlayFileEnd: stopping, this 0x806518 thread 0xdac64
      9. [LT:005e52a0:play ] SetSpeed playing 1 speed 1
      10. returning false
      11. [LT:005e52a0:play ] Close
      12. [LT:005e52a0:play ] Stop playing 1
      13. restoreNeutrino: playing 1 isUPNP 0
      14. [zapit.cpp:StartPlayBack:2214] standby 0 playing 0 forced 0
      15. [zapit] vpid 0 apid 0 pcr 0
      16. [capmt.cpp:SetMode:255] PLAY: fe_num 0 dmx_src 0
      17. [capmt.cpp:SetMode:286] channel 6e5103f90001ef75 [ProSieben HD] mode 0 START src 0 mask 0 -> 1 update 0 rmode 0 mp 1
      18. [capmt.cpp:SetMode:309] socket only
      19. [capmt.cpp:SetMode:428] CI: use CI for [ProSieben HD]
      20. [capmt.cpp:SetMode:437] (oldmask != newmask) || force_update)
      21. [ca_ci] -> SendCAPMT
      22. TP: 6E5103F90001
      23. SID: EF75
      24. SOURCE: 0
      25. CA_MASK: 1
      26. CALEN: 0
      27. Scrambled: 1
      28. Mode: 0
      29. Enabled: START
      30. restoreNeutrino: restore mode 1
      31. CNeutrinoApp::handleMsg: CHANGEMODE to 1 rezap 1
      32. [neutrino.cpp:tvMode:4113] rezap 1 current mode 7
      33. ShowText '(ProSieben HD)'
      34. CRemoteControl::tvMode
      35. CNeutrinoApp::SetChannelMode 1 [tv]
      36. [neutrino.cpp:SetChannelMode:1963] newmode 1 sort old 0 new 0
      37. **************************** CChannelList::zapTo_ChannelID 6e5103f90001ef75
      38. **************************** CChannelList::zapToChannel me 0x827fa0 Alle Kanäle tuned 339 new ProSieben HD -> 6e5103f90001ef75
      39. 13:35:21.905 [sectionsd] commandserviceStopped
      40. 13:35:21.905 cnThread: stop eit update filter (not active)
      41. stopPlayBack: stopping...
      42. stopPlayBack: stopped
      43. 13:35:21.905 [sectionsd] commandserviceStopped done
      44. CChannelList::adjustToChannelID me 0x827fa0 [Alle Kanäle] list size 2653 channel_id 6e5103f90001ef75
      45. [zapit.cpp:ZapIt:520] [zapit] zap to ProSieben HD (6e5103f90001ef75 tp 17d40f0103f90001)
      46. [zapit] saving channel, apid 0 sub pid 0 mode 0 volume 62
      47. [zapit.cpp:StopPlayBack:2308] standby 0 playing 0 forced 0 send_pmt 1
      48. [capmt.cpp:SetMode:255] PLAY: fe_num 0 dmx_src 0
      49. [capmt.cpp:SetMode:286] channel 6e5103f90001ef75 [ProSieben HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 1
      50. [capmt.cpp:SetMode:339] (newmask == 0)
      51. [ca_ci] -> SendCAPMT
      52. TP: 6E5103F90001
      53. SID: EF75
      54. SOURCE: 0
      55. CA_MASK: 0
      56. CALEN: 0
      57. Scrambled: 1
      58. Mode: 0
      59. Enabled: STOP
      60. [ca_ci] -> StopLiveCI
      61. restoreNeutrino: restoring done.
      62. PlayFileEnd: stopped
      63. CMoviePlayerGui::SelectFile: isBookmark 0 timeshift 0 isMovieBrowser 1 is_audio_playing 0
      64. [mb]->exec
      65. [fe0/0] tune to 610000 DVB-C(Annex A) QAM_64 0 H/L srate 6875000 pli 0 plc 0 plm 0 (tuner 610000000 offset 0 timeout 4000)
      66. ShowText 'Meine Aufnahmen'
      67. [mb]->paint
      68. [mb]->refreshBrowserList
      69. [mb]->refreshFilterList 22
      70. [mb]->refreshTitle : Meine Aufnahmen
      71. ShowText 'Das Traumschiff'
      72. [mb]->onSetGUIWindow: gui 1 -> 1
      73. [CListFrame]->paint MovieBrowser
      74. [mb]->onSetFocus: focus 0 -> 0
      75. [mb]->refreshMovieInfo m_vMovieInfo.size 234
      76. [mb]->refreshChannelLogo:1330
      77. [mb]->initMovieCover:1375
      78. [mb]->refreshMovieCover:1500
      79. [CListFrame]->hide MovieBrowser
      80. [mb]->saveSettings
      81. [mb] force reload next time
      82. ShowText '(ProSieben HD)'
      83. [ca_ci] -> GetNumberCISlots
      84. [ca_ci] -> GetNumberSmartCardSlots
      85. [neutrino.cpp:standbyMode:4203] ON
      86. ShowText 'standby... '
      87. StopAutoRecord: autoshift 0
      88. stopPlayBack: stopping...
      89. stopPlayBack: stopped
      90. [frontend.cpp:getEvent:829] [fe0/0] ######## FE_TIMEDOUT (max 2282)
      91. 13:35:25.003 [sectionsd] Removed 0 old events (0 left), zap detected 0.
      92. [fe0/0] ############################## poll timeout, time: 4002 msec (min 2000 max 4002)
      93. [zapit.cpp:enterStandby:2362] standby 0 recording 0
      94. [zapit.cpp:StopPlayBack:2308] standby 1 playing 0 forced 0 send_pmt 1
      95. [frontend.cpp:Close:435] [fe0/0] close frontend fd 36
      96. [fe0/0] diseqc standby
      97. [frontend.cpp:Close:435] [fe0/1] close frontend fd 37
      98. [fe0/1] diseqc standby
      99. 13:35:25.987 [sectionsd] commandserviceChanged: Service change to 0 demux #0
      100. 13:35:26.007 Request of stop scanning (now scanning).
      101. ShowText ' '
      102. CLCD::setlcdparameter(dimm 5 power 1)
      103. ShowText ' 13:35'
      104. [neutrino.cpp] executing /var/tuxbox/config/standby.on.
      105. [scanepg.cpp:AddTransponders:201] Added bouquet #18, scan map size: 3
      106. [scanepg.cpp:Start:226] starting standby scan, scanning 0, scan map size: 3
      107. [scanepg.cpp:AddTimer:326] rescan timer id 46
      108. [scanepg.cpp:AddTimer:327] rescan time is 24*60*60
      109. [zapit.cpp:enterStandby:2362] standby 1 recording 0
      110. 13:35:26.038 Request of stop scanning (now idle).
      111. [LT:007ed0e0:power ] SetCpuFreq(50000000) => set standby = true
      112. [LT:007ed0e0:power ] SetCpuFreq(50000000) => set standby = true
      113. Segmentation fault
      114. Neutrino exited with exit code 139
      Alles anzeigen
    • Neu

      Hallo, ich brauche mal Hilfe, da es sich teilweise um auch um die libcoolstream-mt.so handelt

      pzapit -var liefert immer nur den Wert 3, egal welche Einstellung man vornimmt. Das betrifft auch die Armbox.

      Somit kann z.B. logomask nicht mehr richtig rechnen.

      Quellcode

      1. NEO-00XXXX:~# pzapit -var 1
      2. NEO-00XXXX:~# CSAPI (VIDEO): setAspectRatio: aspect 1 mode -1
      3. CSAPI (VIDEO): VIDEO: Set format to 4:3
      4. NEO-00XXXX:~# pzapit -var
      5. 3
      6. NEO-00XXXX:~# pzapit -var 2
      7. NEO-00XXXX:~# CSAPI (VIDEO): setAspectRatio: aspect 2 mode -1
      8. CSAPI (VIDEO): VIDEO: Set format to 14:9
      9. NEO-00XXXX:~# pzapit -var
      10. 3
      11. NEO-00XXXX:~# pzapit -var 3
      12. NEO-00XXXX:~# CSAPI (VIDEO): setAspectRatio: aspect 3 mode -1
      13. CSAPI (VIDEO): VIDEO: Set format to 16:9
      14. NEO-00XXXX:~# pzapit -var
      15. 3
      Alles anzeigen


      EDIT:


      Ich korrigiere mich mal selbst: Mit der Abfrage pzapit -var kann man nur das gesendete Bildschirmformat abfragen 1=4:3, 3=16:9
      Das eingestellte Videoformat aber wohl nicht. Bei der Armbox kann man das eingestellte AspectRatio unter

      Quellcode

      1. /proc/stb/video/aspect abfragen
      Weiß jemand wie man das bei einer CST abfragen kann? Habe bis dato nichts gefunden.


      Danke

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von GetAway ()